Friday, April 15, 2011
【 Weak current College 】 battery terms 3 】
Cathode cathode terminals: columns
Connect the battery positive electrode terminals.
3.19 anode terminals: negative column
Connect battery negative electrode terminals.
3.20 electrolytes: electrolyte
Play with mobile ion and Ionic conductivity of liquid or solid substances.
3.21 battery shell: battery slot
Accommodate groups and electrolyte batteries from electrolyte corrosion of the container.
3.22 overall shell: overall Groove
With several cells, each cell can be equipped with a great group of battery shell.
Battery slot bottom ribs or mounted on its bottom part, to support a group, on the detachment from plates down the active substances a
Particle deposition in it without causing a short circuit between the plates.
3.24 insulation card
Ensure the plate edge and battery shell wall insulation between the parts.
3.25 battery cover
Often with filling holes, IL stomata and Terminal leads to bore closed battery shell components.
Note: tray, it can be closed several single battery shell.
3.26 sealants: sealing compound
To make the battery cover and shell or Terminal sealing material.
3.27 liquid hole plug: the plug
For closed filling holes while allowing the gas to escape.
3.28 exhaust valve
When the internal pressure, allowing the gas to escape, but do not allow air to enter.
3.29 safety plug
When the battery is exposed to open flame or spark protection when external battery internal will not explode in a special structure of the device.
Liquid level indicator 3.30
Indicates the single battery electrolyte level height of installation.
3.31 retaining: Protection Board
In most groups to reduce gas emanation or electrolyte movement outside the electrolyte, splash and to prevent foreign objects enter the filling hole
And damage to the insulating parts of polar groups.
3.32 connection: connector
For conducting the single battery current between the conductors.
3.33 output cable
Used to connect the battery charger with load or flexible cable.
3.34 terminal strip
For battery terminals and electrical connection of parts detection tester for electronic circuit.
3.35 battery combo box: battery shell
To accommodate several single battery or battery with the side walls of the container.
3.36 battery combo box
To accommodate several monomers batteries or batteries of frame container.
3.37 battery cushion
Typically for fixed-type insulation pad at the bottom of the battery.
3.38 battery holder
One or more layers of a fixed-type battery bracket.