Weak current College】 【projector bulb zero method (compare all)】.

LUXEON (lixun) projector zeroing method
Generally in the menu. Some models also have operational hints (LV2). Cleared to zero. ASK (u vote God) projector zeroing method
Generally in the menu, and select Reset lamp time selected YES you can. SHARP (sharp) projector zeroing method
Sharp video machine (PN200/300/500/C10) bulb zero time, press and hold standby reduced under the "volume" + "select", after the post;
Sharp 100S/00X/200/220 and other multimedia projector bulb zero method, standby press-, +, AUTOSYNC three keys, after power-on;
300S, 300X is press ENTER on your remote, down arrow, left arrow, and then press the
ON power on (without positive real)
Sharp DLP projector of zeroing: standby press "right" + "down" + "enter" + "power" to
Sharp 200/220, projector bulb zero method, standby press-, +, AUTOSYNC three keys, after power-on;
CN450S CN450X CN500X zeroing method: in the standby state (do not post), press the projector; INPUT ENTER UNDO ON more than 3 seconds to turn on his own. If you display; bulb 100% indicated to zero;
AN100S AN100X AN120S and hold (standby state) projector + and AUTO SYNC, press on the projector ON and-button if the display shows light gun has LAMP0000H reset
SHARP NV21 series zero: no electricity, according to the direction of right, bottom, OK, continue to hold down for 5 seconds after receiving electricity;
Sharp XR11 press the power key and the down arrow key and OK CTX projector zeroing method
In menu choose Reset lamp time
Moreover the menu also has a "close warning" light bulb, the option is set to off (off) won't tip the lamp time Philips (Philips) projector zeroing method
Power, menu, press the time bar lamp projectors on the OK button for 3 seconds and Hitachi (Hitachi) projector zeroing method
Power on, press the RESET key for 3 seconds, the time of dialogue, select 0 on OK
Hitachi HS800/CP-210 zero out of small machine is: put the menu moves to the time bar, press and hold 3 seconds; youjian Morningstar projector zeroing method is sharp and the morning star lixun OEM. You can reference lixun and sharp.
Morningstar TL460 projector reset the lamp timer method
Hold down the projector's + and AUTOSYNC button press the projector ON and on the UNDC-button
Then, start screen displays 0000
Morningstar CX-525 lamp timer reset method
In the menu of the lamp reset option selected YES you can.
Morningstar CX-500/505/600/610/615 models: turn on, no signal state then press, top, left, right, enter the menu, and the lamp clear, color temperature, etc., are all in it
Morningstar CX-59/69/550/650590/690 models are SHARP foundry, cleared and into the maintenance menu to see the corresponding model SHARP; Morningstar CX490/500/600/610 zeroing: power on, power source, to enter the menu, press the arrow keys to enter the input message status, use the "+" key to reset the time, to confirm exit. EIKI (unconfirmed) (love Qi) projector zeroing method
Love, projector from SANYO foundry, zero method reference Sanyo
All in the menu, there is a LAMP bulb typefaces this bar, are all zero method YES3M projector
3M projector by Hitachi and Fujitsu foundry, zero methods vary, in short the operator panel has a RESET button to clear reference to the Hitachi method (power on, press the RESET key in 3 seconds, the time of dialogue, select 0 on OK). Otherwise, try the Fujitsu zero method.
MP8030 zeroing method
Is press the TIMER button for two seconds, a dialog box that appears, select zero. (Unauthenticated)
3M8746 zeroing: long press RESET the lamp time is displayed, press the left and right keys to move the cursor to 0000, and press the left key so that the menu disappears, OK! Canon (Canon) projector zeroing method
Canon launches product less than OEM for Sanyo, Sanyo zero method reference
All in the menu, there is a LAMP bulb typefaces this bar, all is YES; PROXIMA (Po Shima) projector zeroing method
PROXIMA (Po Shima) projector for Sanyo manufacturing, you can reference the Sanyo's clear method.
All in the menu, there is a LAMP (bulb) typefaces this bar, all is YES; BENQ (BenQ) projector zeroing method
BenQ projectors cleared (validated)
Power on, press the EXIT key for a few seconds, when the dialog bar appears, press the left or right will zero out .8 and 6 and 7 series Tuk that Epson (Epson) projector zeroing method
Old models: only apply frame has resistance machines: frame Department has a low resistance (zero by), as long as the machine corresponds to a four small pin shorted out, this is annoying, and short circuit could not good but also may cause other problems.
New models in the menu to reset the lamp time on it.
Emp-5600 lines appear live help key on the first dialog box, choose OK.
EMP-3300: after the lamp mounted guard is locked, pressing the Menu of the projector and Sync key again will power on, five seconds and then release the two keys, Menu and Sync, cycledCan be.
EMP-3500: after the lamp mounted guard is locked, pressing the projector on Tracking + and Sync + key to power on, five seconds and then release Tracking + and Sync + 2 keys, power back up.
Epson 730 zero method of projector:
Help key and trapezoid correction ' minus ' keys at the same time, the maintenance menu, trapezoid correction key and press the confirm key can be cleared, there must be a signal to operation
EPSON EMP-S1 bulb zero: go to menu select Reset, and then select the lamp count is reset, press the OK button and choose YES to LG projector lamp machine zero method
LG projector bulb zero by pressing the up key for five seconds, a pop up menu, press menu key and the right
LG LCD machine: menu, up, down, left, right, OK;
LG part model: hold the UP key until you see the Lamp hours info "and then press MENU to ASEE (aoshi) projector zeroing method
SOUCE UP + DOWN KEYSTONE ZOOMLUMENS (from us) projector zeroing method
Beauty from the menu + OK
Toshiba (Toshiba) projector zeroing method
Without power by power + menu + OK + enter and hold power for 3 seconds, which is applied to the machine before all 780;
780/380 later machines (S20/40 ... and so on) is cleared to zero: without power by power + menu + enter (less one), and hold power for 3 seconds, the red indicator light is turned on; AVIO (changeable Po) projector zeroing method
AVIO (changeable Po) projector in the domestic market share is small, only in the domestic sales of the models of zeroing method
Press and hold the menu (MENU) and then turn on the bulb key total power
This is the old models of clear methods, new models of still unknown. ViewSonic (ViewSonic) projector zeroing method
ViewSonic (ViewSonic) OEM part by Hitachi, Hitachi zero method reference
Power on, press the RESET key for 3 seconds, the time of dialogue, select 0 on OK SANYO (Sanyo) projector zeroing method
All in the menu, there is a LAMP (bulb) typefaces this bar, all is YES; Panasonic (Matsushita) projector zeroing method
First press the "MENU" to find the lamp usage time, and then press "ENTER" in three seconds, the "POWER OFF", turn off the power to restart OK!
This is the old models of clear methods, new models of still unknown.
Panasonic has a 759 machine is in standby, press power and put the INPUT key does not, at the transmission system;
Panasonic 557 zeroing
Open the menu: with the up and down direction keys to select the ' settings ' select projection lamp reset "is" off the master switch-(electricity) OKFUJITSU (Fujitsu) projector zeroing method
Press and hold the power key + press the OK button three times [not sure on the menu, there is no key with the remote control. applicable part of the machine]
Left + right + on don't know for the models
INFOCUS (rich visual) projector zeroing method is generally in the menu Ching PCT rich visual 500/530 in power on, press menu + volume reduction in 3 seconds, after the open menu to see if there's a clear, if not you can try several times. NEC (Mar) projector zeroing method
830/840/850/440 series time to appear second indicator light, including the LAMP led, zero out method is standby OFF kin under press 20 seconds or so.
NEC 460/660 series zero method: in standby mode, press the help key for 10 seconds
VT47 + in the default option in the menu under Select clear lamp timer, and then press the OK key on OK SONY (Sony) projector zeroing method
RESES + left + right + OK (for Sony most models), Panel key not enough you can also use the remote control.
SONY P15 projection lamp clear method
In light of State press RESET after you press the left button to confirm the key after pressing button 7 seconds to PLUS (plus) projector zeroing method
Applicable models: PLUS U2-811/U2-815/U2-815C/U2-1110/U2-1130/U2-X1130C/U2-1150. at 1100 hours zero: menu selection to the timing, press ON (about 8 seconds); use 1100 hours, no State, directly press ON (25 seconds).
Applicable models: PLUS U3-810SFC/U3-1080SFC/U3-810WZC/U3-1080WZC/U2-X200UC/4-161/U4-121/V-1080C/V-807C/V-1100C/U2-850/U2-1500/U2-850W/U2-1500W/U5-121/U5-162. menu lamp timer zeroing Mitsubishi Projector zeroing method
In the standby power, left, right. At the first one and then power on the system.